Ford PowerStroke 6.0L 2003-2007 F Series, Excursion and 2004-2010 E Series Engine Oil Cooler Kit

In our experience we tend to see these screens rip when there has been some form of oil contamination. When there is contamination in the system, it clogs this filter screen. If the screen becomes too plugged the pressure of the pump will force the oil to break through the screen preventing the system from being starved of oil. We will definitely pass on your concerns to the manufacturer for their consideration.

We are sorry for the misunderstanding Cam, it was in no way our intent to give the impression that this was a Ford part just that this was a part for your Ford application. The reason we use the Alliant Power oil cooler is because Alliant Power uses a similar OE design to maximize it's cooling effectiveness.The Alliant Power oil cooler meets or exceeds the OE specification in all areas. Some of the highlights of the Alliant Power oil cooler are: • Burst pressure exceeds 7 bar standard by 5X (41.25 bar Avg) •  Pressure cycling 0-7 bar:  112,038 cycles without failure (leaks or visible deformation) •  Stud torque exceeds 16 ft lb spec (22.25 ft lbs avg to failure) •  Increase in pressure drop on water circuit vs. OE •  Decrease in pressure drop on oil circuit vs. OE •  Increased heat rejection vs. OE • Warranty is less than 0.3% and often are the result of shipping damage and no fault of the product. Also we do not have a phone number listed on our website as we have found that the majority of our customers prefer to communicate with us via email. On occasion when a customer has wanted to speak with us on the phone we have supplied them with our contact phone number via email. If you haven't installed the Alliant Power oil cooler we will be more than happy to take it back for a full refund. If you would like to proceed with a return you can email me or call me at 1-800-661-4425 extension 250 and I will provide you with a prepaid waybill for the return. Thank you, Jarred.